Food Industry Measurement and Control Solutions

Food Industry Measurement and Control Solutions are organized across ten dimensions: Temperature, Water Analysis, Pressure, Flow, JUMO PEKA Process Connections, Humidity, Control, Recording, Monitoring, and Automation & Visualization. **Temperature** Temperature is a critical measurement parameter in the food industry. Since temperature directly affects raw material quality, manufacturers must precisely control and monitor it to prevent any negative impact on quality. JUMO monitoring systems assist in this task. Many applications, particularly in process technology, require precise temperature measurement, whether for high or low temperatures. Our temperature sensors deliver high accuracy even under extreme conditions and wide temperature fluctuations. For closed production processes with strict hygiene requirements, we offer thermocouple sheaths and EHEDG-certified products manufactured from 1.4404/1.4435 (316L) stainless steel with an electropolished finish and a surface roughness of Ra ≤ 0.8 µm. In locations where cabling is impractical, such as rotating vessels, production lines, or elevated positions, JUMO Wtrans is the ideal solution. This device offers flexible installation and precise wireless transmission of measured temperature values. The upgraded JUMO Wtrans version is suitable for high-temperature environments up to 125°C. Our temperature product range includes: * JUMO dTRANS T000 temperature sensor (Model 902820) * JUMO PROCESStemp RTD temperature sensor for process technology (Model 902915, ATEX certified) * JUMO FOODtemp immersion RTD resistance thermometer (Model 902350) * JUMO dTRANS T00 screwed-in RTD resistance thermometer (Model 902815, CIP-compliant seal) * JUMO DELOS T electronic temperature switch with display and analog signal output (Model 902940) * JUMO RTD resistance thermometers for food and pharmaceutical industries (Model 902810) * JUMO Wtrans receiver (for receiving signals from wireless RTD resistance thermometers, Model 902931) * JUMO Wtrans T RTD resistance thermometer (wireless, heat-resistant, operable at 125°C, Model 902930) Certifications and interfaces include EHEDG, Ex, and IO-Link. **Water Analysis** JUMO provides measurement technology for fundamental parameters such as temperature, pressure, and humidity in food manufacturing, storage, and processing. We also offer comprehensive measurement technology and sensors for water chemistry parameters like pH and conductivity, delivering reliable products for pH, oxidation-reduction potential (ORP), and conductivity. Beyond handheld measuring devices for quality control (e.g., penetrating meat and cheese to measure pH), JUMO provides online measurement technologies for continuous monitoring. After disinfecting packaging, bottles, and facilities, these devices can monitor residual chlorine, chlorine dioxide, hydrogen peroxide, peracetic acid, and ozone during processing. In addition to the tested and proven JUMO CTI-750 electromagnetic conductivity measuring device (available with plastic or stainless steel housings), our product line for Clean-in-Place (CIP) and Sterilize-in-Place (SIP) now features the JUMO tecLine CR-4P electromagnetic conductivity electrode. Standard brackets and devices with process connections commonly used in the food industry are also compatible with these sensors. Non-glass JUMO ISFET pH electrodes allow direct pH measurement during processing and evaluation using JUMO AQUIS 500 pH. These electrodes carry the 3A hygienic standard mark, indicating suitability for food and pharmaceutical manufacturing with stringent hygiene requirements. Manufactured from FDA-approved materials and equipped with compliant process connections, they ensure safe application in highly sensitive processes. Our water analysis products include: * JUMO CTI-750 stainless steel housing conductivity transmitter (Model 202756) * JUMO tecLine Ci hygienic electromagnetic conductivity electrode (Model 202941) * JUMO pneumatic retractable sheath with hygienic process connection (Model 202823) * JUMO tecLine HY hygienic application pH composite electrode (Model 201022) * JUMO dTRANS pH/CR/AS 02 compact multi-channel transmitter and controller series for liquid analysis (Models 202551/202552/202553) * JUMO tecLine CR-4P electromagnetic conductivity electrode (Model 202930) * JUMO digiLine Ci HT10 integrated electromagnetic conductivity transmitter (Model 202761) * JUMO AQUIS touch P/S modular multi-channel measuring device with built-in controller and recording functions, IP67 protection rating (Models 202580/202581) The solution utilizes the JUMO digiLine intelligent bus system for digital sensors. Based on JUMO digiLine, a data bus system connects digital water analysis sensors while providing matching connectors and display units. This allows for the simple creation of star and tree-structured sensor networks using a single shared signal line for communication with controllers or other devices. This method enables faster and more efficient wiring when measuring multiple parameters at different locations. A single system can measure various parameters including pH, temperature, ORP, conductivity, dissolved oxygen, turbidity, and disinfectants, making it suitable for process applications in food, pharmaceutical, and water treatment industries. Features include secure digital transmission for process monitoring, modular systems for independent measurement and network building, and the JUMO AQUIS touch series transmitters supporting quick connections and touchscreen operation for easy replacement and calibration. Even if a sensor fails, the converter remains operational. Simple, reliable calibration sensors can be conveniently managed via PC or JUMO DSM software. Connection Option 1: The AQUIS touch series multi-channel measuring device is designed specifically for water analysis. It serves as a platform for displaying and further processing measurement data. Up to 6 digital sensors can be connected to the device module, and with interface and input modules, up to 25 sensors can be utilized. Additionally, four independent control loops can be executed. Measured values are recorded as paperless records with anti-tamper functionality. Connection Option 2: JUMO digiLine sensors can also connect to general-purpose measuring, control, and automation systems like JUMO mTRON T. They can be integrated into full automation solutions or operate independently as standalone systems. Compact PLCs typically support the integration of 62 digital sensors. **Pressure** Beyond temperature, pressure plays a major role in many areas of food production. To help monitor and control these processes, we have developed a range of high-quality pressure measuring devices. Food technology's hygiene requirements are closely linked to measures against microbial proliferation, such as hygienic design, cleaning, and disinfection processes. In these contexts, two critical measurement variables are process pressure and level. JUMO offers various safe and reliable pressure measuring devices equipped with different flat diaphragms to meet diverse requirements. In addition to pressure separators for contaminated, high-temperature, high-viscosity, or corrosive media, the product line includes instruments capable of handling Clean-in-Place (CIP) and Sterilize-in-Place (SIP) applications up to 200°C. High-temperature media can come into direct contact with stainless steel or ceramic diaphragms. To meet the needs of various end customers, some plant engineers may need to install multiple connection systems. To promote cost-effectiveness and simplify modules, we developed the elastic sealing process connector JUMO PEKA, which is certified according to EHEDG standards. Our pressure products include: * JUMO dTRANS p0/31 pressure transmitters (Models 402050/404366) * JUMO dTRANS p5 pressure sensor with IO-Link (Model 402058) * JUMO delta p20Pro and JUMO p20Pro differential pressure and pressure transmitters (Models 403522/403525) * JUMO TAROS S6 H hygienic pressure transmitter (Model 402071) * JUMO DELOS SI stainless steel housing electronic pressure switch with display (high precision, programmable, suitable for high-temperature media, Model 405052) * JUMO Wtrans p pressure transmitter with wireless data transmission (Model 402060) Certifications and interfaces include EHEDG and IO-Link. **Flow** In the fluid food industry, flow measurement is a key parameter. While magnetic induction methods are widely used in industry, JUMO differential pressure transmitters can also measure gas flow rates within substances. Therefore, our solutions apply to all scenarios, whether measuring gas or liquid flow. JUMO's long-term stable and accurate flow meters help design safe processes in the food industry. Based on this application, suitable flow meters are available for fluids, gases, and steam. ATEX certification or hygienic process connections can be provided upon request. JUMO's product range is extensive. Orifice plates and Pitot tubes offer maximum variety; combined with differential pressure transmitters, they provide high measurement accuracy. Electromagnetic flow meters are also available for special fluid flow measurements. The JUMO flowTRANS MAG H1 is specially developed for hygienic applications. These devices are highly flexible, offering numerous standard widths, tube linings, materials, and hygienic process connections. Our flow products include: * JUMO flowTRANS MAG H0 electromagnetic flow meter (Model 406061) * JUMO dTRANS p2/p0 differential pressure transmitters (Models 403022/403023) * JUMO PINOS L2 thermal mass flow sensor (Model 406041) * MID flow transmitter (Model 406010) * Flow sensor accessories (Model 406090) **JUMO PEKA Process Connections** JUMO PEKA process connection adapters are designed for hygienic applications, suitable for equipment such as temperature, pressure, and conductivity measurement devices. Regardless of the required parameter, their hygienic design ensures significant process safety. The adapter system is compatible with temperature, pressure, and conductivity measurement devices. Components in contact with the product within the adapter system are EHEDG-certified. They are manufactured from 1.4435 (316L) stainless steel, with seals meeting FDA standards. The system features a hole-free installation and hygienic design, making it easy to clean and meeting the requirements of the food, pharmaceutical, and biotechnology industries. Robust connectors feature a rotary adapter that protects flat-seated O-rings from damage during installation and allows users to install at the appropriate angle. The durable threads on these measuring devices withstand repeated installation and removal, greatly simplifying installation, cleaning, and maintenance. The system offers various process connections (welded sheaths Ø55mm, orbital welded sheaths DN5/DN2/DN0, fasteners, corrosion-resistant, complying with DIN 11864-1 and VARIVENT standards). Additional options include DIN 32676 for DN5/32/40 and DN0, DIN 11864-1A for DN0/DN0, NKS DIN 11864-3A for DN0 sterile connectors, and VARIVENT connectors for DN5/32 and DN0-125. These are suitable for various applications and can be combined with many temperature probes and pressure transmitters. The process connections listed in the respective datasheets for the measuring devices are 997. **Humidity** For manufacturers of dry, powdered products, relative humidity plays a decisive role during production. Humidity measurement is crucial, especially for producing hygroscopic substances. JUMO has developed reliable measurement systems to support production monitoring. The 907023 series of temperature and humidity sensors has become a suitable solution for temperature and humidity measurement under extreme production conditions. This series leverages 30 years of industrial humidity measurement experience. Capacitive humidity transmitters offer precise and reliable measurements with resistance to general contamination and various chemical substances. The measurement probe can be paired with a graphic display unit for easy monitoring of the production process, with data traceability spanning up to one year. These humidity transmitters are equipped with an intelligent exchange probe (Type 907027). Their advantage lies in the fact that insertion probes can be replaced in just a few seconds. Calibration data is stored directly on the probe, ensuring that probe replacement does not affect data accuracy. Furthermore, they feature a precise calibration procedure and the latest microprocessor technology, ensuring reliability and excellent accuracy throughout the entire operating range. Our humidity products include: * JUMO industrial measurement probe (for humidity, temperature, and derived variables, complying with DIN 43710 and DIN EN 60584 standards, Model 907037) * JUMO capacitive temperature and humidity transmitter with intelligent exchange probe (Model 907027) Certifications and interfaces include Ex. **Control** Reliable operation in food processing is ensured only when sensor design and measurement control are appropriate. JUMO systems fulfill this requirement. When precise monitoring of multiple physical variables such as time, temperature, or pressure is required during production, high-precision controllers are necessary. Electronic microcontrollers enable rapid and precise cooling and temperature control. The compact controller series JUMO diraTRON and JUMO meroTRON meet these higher demands, allowing most control tasks to be completed. Fieldbus interfaces facilitate easy connection to process control systems. The JUMO IMAGO F000 is specifically designed for cooking and smoking systems in the meat processing industry. The JUMO IMAGO 500 process controller features a color display and 50 time planning programs, providing operators with control suitable for various recipes and food processing procedures. One device supports up to eight control channels, allowing adjustment, monitoring, and control of different processes such as flow, pressure, temperature, or tank levels to prevent overheating. Precise regulation is particularly important in food industry production, which is easily achieved through the integrated cascade controller of the JUMO IMAGO 500. Our control products include: * JUMO mTRON T measuring, control, and automation system (Model 705000) * JUMO diraTRON compact controller (Models 702110/702111/702112/702113/702114) * JUMO IMAGO F000 measuring, control, and automation system (with controller module and input/output modules, Model 703590) * JUMO IMAGO 500 multi-channel process and program controller (Model 700101) * JUMO DICON touch dual-channel process and program controller (with paperless recorder and touchscreen, Model 703571) * JUMO meroTRON modular single/dual-channel controller with PLC function (Models 703051/703052/703053/703054) **Recording** Paperless recorders from the JUMO LOGOSCREEN series enable the collection, archiving, and evaluation of measured values with anti-tamper protection. The recording and archiving of measurement data, especially when evidence provision is mandatory, has long been part of JUMO's measurement technology and product portfolio. Paperless recorders are designed as high-quality alternatives to paper recorders, with significant advancements in factory visualization, monitoring capabilities, and web server connectivity. The JUMO LOGOSCREEN 601, besides featuring a 5.7-inch touchscreen, offers various digital interfaces, up to 6 universal inputs, batch report recording, factory visualization, and limit monitoring. As the flagship of the series, the JUMO LOGOSCREEN 700 boasts high expandability with up to 18 measurement inputs, the ability to generate 10 customer-specific process screens, and up to 5 batch reports. JUMO screen recorders comply with US FDA 21 CFR Part 11 requirements for electronic records of process data, thanks to the latest hash algorithms that render data tamper-proof. **Automation** Proven JUMO mTRON T measuring, control, and automation systems provide comprehensive recording functions. JUMO variaTRON not only allows users to benefit from recordings within the device but also enables intuitive visualization and evaluation via software. JUMO smart hardware evaluation ensures tamper-proof archiving of measured values and other data. Our recording products include: * JUMO LOGOSCREEN 601 touchscreen paperless recorder (Model 706521) * JUMO LOGOSCREEN 700 high-expandability paperless recorder (Model 706530) * JUMO mTRON T multifunction panel 840 (measuring, control, and automation system, Model 705060) * JUMO mTRON T central processing unit (with controller module and input/output modules, Model 705000) * Automation systems and software for evaluation and visualization (Models 705002/705003/701840) * JUMO variaTRON recorded measurement data **Monitoring** Temperature is critical for food quality, so JUMO provides practical and reliable monitoring solutions for production processes by monitoring plant operations via electromechanical and electronic temperature switches. Deviations in standard temperatures during production directly affect food attributes, making temperature monitoring essential in the food industry. In all plants, actual temperatures exceeding or falling below a specific value can have adverse, even irreversible, effects on food quality. Thus, monitoring this parameter is particularly important; temperature control in chocolate production is a prime example. To minimize such irreversible impacts, JUMO offers electronic and electromechanical temperature switches that continuously monitor the plant. A key advantage is that when temperatures reach maximum or minimum limits within the facility, temperature switches compliant with DIN EN 14597 adjust the temperature back to a safe range. Our monitoring products include: * JUMO safetyM STB/STW/Ex safety temperature limiters and safety temperature monitors (complying with DIN EN 14597, Models 701150/701155) * JUMO safetyM TB/TW safety temperature limiters and safety temperature monitors (complying with DIN EN 14597, Models 701160/701170) * JUMO heatTHERM-AT surface-mounted temperature switch (ATH series, Model 603070) * JUMO heatTHERM panel-mounted temperature switch (EM series, Models 602021/602031) * JUMO frostTHERM-AT/-DR freeze protection temperature switch (Model 604100) * JUMO frostTHERM-ATE electronic freeze protection temperature switch (Model 604170) Certifications and interfaces include Ex, SIL, and PL. **Automation and Visualization** Stable production processes require reliable procedures. JUMO provides transmitters, simple display units, and JUMO automation systems, enabling automation and visualization during production. Transmitters designed for industrial applications can record temperatures via two-wire or three-wire Pt00 RTD resistance thermometers. The output signal is a linear temperature ranging from 4 to 20 mA. During temperature changes, continuous analog signal paths result in extremely short response times. Under these conditions, the resulting low-noise output signal remains unaffected by interference. Even within small measurement ranges, specific range amplification ensures precision. Transmitters can adapt to measurement tasks via electronic communication. Our automation products include: * JUMO dTRANS T5 programmable two-wire transmitter (Models 707050/707051) * JUMO dTRANS T6 rail-mounted multi-function four-wire transmitter (Model 707071) Certifications and interfaces include Ex, EHEDG, SIL, PL, and UL LISTED. **About JUMO** JUMO was founded in 1948 and is one of the global manufacturers in the field of industrial sensors and automation technology. As a German family-owned enterprise, JUMO employs over 2400 people worldwide, operates 14 production sites, and maintains 25 branch offices. Global sales reached 2.81 billion euros in 2021. Our product portfolio includes sensors for temperature, pressure, flow, level, humidity, and water analysis, along with comprehensive automation solutions. Our goal is to provide globally reliable, energy-efficient, and cost-optimized process solutions. Reliability and trust are core management principles for the JUMO Group and are essential factors for ensuring high employee loyalty. Furthermore, the group provides regular training for professionals to meet future market demands. Sustainable corporate management, combined with realistic growth targets, sound financial management, and a focus on future mainstream markets, ensures the long-term healthy development of the JUMO Group. In 1997, JUMO established its wholly-owned subsidiary in Dalian, China: JUMO Automation (Dalian) Co., Ltd. The company comprises Sales, Production Operations, Product Management, Customer Service, Quality, and other departments. Sales offices are also located in Beijing, Shanghai, Guangzhou, Qingdao, and Chengdu. Drawing on decades of rich experience and superior concepts from the German headquarters, JUMO China has consistently provided high-quality products and efficient services to numerous domestic and international customers, offering complete solutions in the field of measurement and control. JUMO China possesses advanced production lines capable of manufacturing high-quality industrial temperature sensors, paired temperature sensors for heat meters, bimetallic temperature switches, high-precision industrial smart pressure transmitters, and vibration-resistant temperature sensors. Customization is available based on specific user requirements. The company has successively obtained ISO 9001:2015 Quality Management System Certification, ISO 14001:2015 Environmental Management System Certification, ISO 45001:2018 Occupational Health and Safety Management System Certification, ISO/IEC 17025:2017 Testing Laboratory Accreditation, High-Tech Enterprise Certificate, and MID European Metrology Instrument Certification. JUMO products are applied in sectors including environmental protection and energy saving, clean energy, HVAC, food machinery, pharmaceutical machinery, petrochemicals, power generation, and rail transit. On 2015 10 15, the JUMO Group held the inauguration ceremony for its Asia-Pacific Headquarters in Dalian. As the manufacturing center for temperature sensors, the JUMO China factory holds CNAS-accredited laboratory status and a municipal-level R&D center in Dalian, possessing high-tech qualifications. Equipped with a high-tech temperature sensor laboratory, JUMO's business in China has flourished in recent years. Alongside continued production growth, the company has delivered high-quality, stable-performance JUMO products. Moving forward, JUMO will continue to prioritize customers and industry development as the foundation for future growth.

Use Cases:CIP and SIP circuits, cooking and smoking systems, fermentation and storage tanks, filling and packaging lines, and drying areas designed for food factories in dairy, meat processing, baking, beverage filling, chocolate and confectionery, powders and dry foods, and seasonings.